How to Prepare for Dock Installation

All dock components are modular, pre-assembled at the factory, and come with printed assembly instructions, heat-sealed parts packages, and boxed accessories. This makes dock construction a comfortable DIY project.

Dock Installation

When you are ready to start putting your dock together, loosen the post clamps and slide the bottom plates on. It’s fine only to loosen the posts so they are at the correct height for now. Click Here to learn more.

Dock installation is a big project that involves heavy equipment, so getting prepared for the process is essential. Depending on where you live, your dock may require a permit or specific guidelines for construction and use. Additionally, you will likely need to have the shoreline cleared of rocks, debris or organic growth in advance of the start of the construction process.

If you’re building a permanent dock, consider using a Perma Anchor system or another permanent underwater anchor. These are easier to install than conventional augers, and they also place the anchor in a way that’s more stable on muddy bottoms. Finally, be sure to choose the right materials for your dock. These will affect everything from the platform’s durability to its ability to withstand weathering and water damage.

Once the foundation is in place, you can begin installing the dock’s frame. This can be done by a variety of methods, including digging a hole and driving in pilings or setting them up on concrete footers (depending on your lake’s depth). For floating docks, using a hose to “jet” the bottom is common.

A good time to prepare the location for your new dock is in the fall before the ice forms, since this will ensure the ground is firm enough to support the structure. It’s also a great time to install a dock ice eater, which will bubble cold water from below the ice to the surface and help keep your dock from sagging in the winter.

As you build the frame, be sure to leave a few inches of space at the bottom of each upright post (unless you’re anchoring on rock). This will make it easier to attach the stringer brackets when you’re ready to put in your decking.

Finally, be sure to use hot-dipped galvanized fasteners during the entire process. Regular, non-coated nails, screws and bolts will rust quickly when exposed to water. Choosing the proper materials for your dock will help it last longer and reduce its maintenance requirements.

Once the frame is built, it’s time to install your dock decking and accessories. This is a critical step in your dock’s performance and safety, so be sure to follow the manufacturer’s instructions carefully. If you’re working on a rocky lake or shoreline, consider adding a few gangplanks to assist with accessing your dock when it’s in use.


When your dock arrives it will be a complete kit with everything you need to build and install your new boat dock. It’s best to pre-assemble as much of it as possible on dry land before you move it to the water. This will save you a lot of time and effort. It also helps to ensure that all the pieces fit together correctly and that you don’t lose any parts in the water.

Start by removing the pins and fasteners that are attached for shipping purposes from each of the sections. Then, find a clean concrete surface without obstructions where you can lay out each of your dock sections. Begin by looking at the reference medallions on each of the dock sections (the diamond-shaped emblems) to help you determine which way each one should be oriented in relation to the other pieces. This will help you ensure that your dock is level when it’s in the water.

Now that your sections are all positioned you can begin to install your posts. This is a process similar to installing decking. You will need to drill holes in your shoreline and install your footers, then place a treated wood post inside each hole. After you have placed your posts, you can pour concrete around the outer edge of each post and let it set.

Once your posts are installed you will be ready to put in your bottom plates. During this phase you will need to use a carriage bolt and nut to attach each of the bottom plates to each other. After that, you can screw on the black post caps. It’s a good idea to number the bottom plates and their corresponding post so that next year you can remember where each piece goes.

Many communities have laws or regulations that regulate the size, placement and materials of docks on public or private lands. If you’re not sure what your site’s rules and regulations are, it’s important to contact the appropriate authorities before beginning construction. This will save you from having to tear down your new dock later on or face fines for violating the rules.


If you’re planning on using your dock, it’s important to clean it regularly to ensure that it’s safe and free of debris. This process helps to prevent the spread of microorganisms, which can cause serious damage to your dock over time.

When the weather is warm, it’s also a good idea to treat your dock with a preservative or sealant. This will help to keep it looking like new and protect it from fading, cracking, or peeling. Typically, these products can be applied easily with a brush or spray. It’s best to choose a treatment that is environmentally conscious and does not emit poisonous substances into the water, as this poses a threat to marine life.

Inspecting your dock on a regular basis is another important part of maintenance. This allows you to catch any problems before they become larger issues. You should inspect your dock at least twice a year, and particularly after storms or winter seasons, when ice and snow can put extra pressure on the structure. You should check all of the components, including the decking, anchorage system, and coupling system. You should also examine walkways, handrails, and dock equipment.

If you find any problems with your dock, it’s important to repair them right away. This will not only prevent further damage, but it can also make your dock safer for everyone who uses it. If you’re unsure of how to fix something, contact a professional, who will be able to give you advice and recommend the correct repair method.

Many docks, even those made of wood, require regular maintenance to keep them in good condition. It’s important to sand and stain the surface of your dock annually, as well as reapply protective coatings. In addition, you should also lubricate the chains on your dock’s winches and mooring lines to prevent rust. It’s also a good idea to cover your dock in the winter to prevent ice and snow from damaging it.

As an alternative to cleaning and staining, you can also consider painting your dock. This is a cheaper option, and it’s also easy to do. Just be sure to use a high-quality paint, so that your dock will last as long as possible.


When the season ends, removing your dock can be an arduous and time-consuming task. Whether you are removing your dock to prepare for winter or simply to take down some of the components, there are certain steps that should be taken to ensure a smooth and efficient process.

Before starting the removal process, be sure that you have gathered all necessary tools and equipment. This may include a boat or pontoon, ropes and buoys, as well as a dock removal tool kit. In addition, you will need to disconnect any electrical and water connections. This will help prevent any potential accidents or damage during the process.

It is also important to remove any additional dock accessories, such as benches or boat lifts. This will make the pier lighter and easier to work with. Additionally, if your pier is filled with water above the waterline for stability, it’s a good idea to drain it. This will not only make it easier to remove, but it will also ensure that the pier is not damaged by moisture or pests while in storage.

Another important step is to clear away any debris that has accumulated on the dock over the course of the summer. This will help you to get a better idea of the condition of the dock before and after removal. It is a good idea to take this opportunity to clean the entire dock and make any necessary repairs or replacements.

Taking down your dock can be an overwhelming task, especially if you have a large or complex one. However, by following some simple tips, you can make the process much easier and less stressful.

One of the most important tips is to plan ahead and be organized. This will make the job go a lot more smoothly and will allow you to save time and energy. It is also a good idea to purchase or rent a dock removal tool, which will make the job much easier. This will reduce the likelihood of injuries and will make the process faster and more efficient.

The Importance of Strong and Sturdy Dock Construction

Regardless of whether your boat dock will be used for mooring boats or as a recreational facility, some key principles should be considered during construction. Lake Wylie Dock Construction is strong and sturdy.

It should also be well-sheltered from winds and water currents. This can be achieved by replacing old stagnant water in rivers and seaports or by building walls and lee breakwaters in inland ports.

dock construction

The foundation of a dock is important for stability and strength. A good foundation will be strong enough to support heavy loads, resist corrosion, and stand up well against floods. The best foundation material is concrete, which has excellent durability, and is highly resistant to humidity, fire and termites. However, many people prefer a more natural look and opt for wood pilings. These are often treated before installation, which makes them more water-resistant. Wood can also withstand the weather well, but it requires regular maintenance to prevent rot and damage.

A dock can be used for a wide range of purposes, from providing a place to moor boats to offering a relaxing and beautiful view. Whatever purpose you have in mind, it’s important to plan the construction of the dock before constructing it. This will ensure that the design will serve its intended function well and that it will comply with any local ordinances or requirements.

The type, size and layout of a dock foundation will depend on the soil’s capacity and the force and weight the structure will be supporting. It’s recommended to hire a professional to perform a thorough soil assessment before beginning construction. This will ensure that the foundation is properly sized and reinforced to meet the needs of the structure and that it is located in an area that’s safe for the building materials and workers.

Another important consideration when preparing the foundation for a dock is to be sure that it’s built at least a few inches above the maximum waterline. This will ensure that the foundation remains dry and protect any equipment or property stored underneath. To determine the highest point of the waterline, you can check the water’s edge on a map or by looking at nearby natural rock outcroppings.

Lastly, it’s a good idea to install french drains around the perimeter of the foundation for additional protection from moisture. These are perforated PVC pipes that are buried in the ground, and they help to collect and divert excess rainwater away from the foundation. This will also protect the structure from flooding and erosion and minimize the risk of contamination of the soil and surrounding environment.

The material a dock is built from should be strong enough to hold vessels when moored and stable in windy or wavy conditions. Depending on the purpose of the dock, it may also need to be waterproof or at least water-resistant. Wood, concrete and steel are all good choices for the frame and outer posts of a dock, with cedar being the preferred choice because of its rot-resistant properties.

When building the frame of a dock, it’s important to follow all applicable construction codes and guidelines. Taking shortcuts or cutting corners at this stage of the construction process can cost you in the long run. Taking the time to do things right will ensure that your dock is safe and durable for years to come.

The design of a dock should take into account the amount of traffic it will need to handle. Larger docks can have a central entrance channel to facilitate traffic movement. For smaller docks, the entrance channel can be designed to resemble a natural waterway or be enclosed within a structure. Some docks are naturally sheltered from winds and waves, but most have to be provided with man-made sheltering structures such as walls or lee breakwaters.

Another consideration is how high the dock will be. It’s important to keep in mind that the height of the water can change and fluctuate over the course of a year. The best practice is to build the dock at the maximum water level of the lake or river in which it will be located. This will allow the dock to be used for the most possible amount of time, especially during dry seasons.

For this reason, many commercial docks are constructed using steel pilings rather than wood. While steel is the sturdiest option, it can be difficult to work with as it’s very heavy. When constructing a steel dock, the use of blind bolt anchors is very important. These anchors are fastened to aluminum brackets that are then welded to the steel pile.

While some people build their own docks, it’s best to leave the construction of a larger commercial or community-owned dock to professionals. The skills and experience of a professional marine contractor can ensure that the finished product is strong, durable, and compliant with all local rules and regulations. In addition, they can help you with any unforeseen issues that might arise during the construction process.

Once the basic frame is constructed and the footers and outer posts are in place, decking materials can be installed. Like any other decking project, this is done in a similar fashion, with the material being cut to fit and then secured to the frame using screws or nails. Once the decking is in place, it’s important to add any additional shoreline support posts to avoid structural collapse.

The type of material used for dock planking is also a big decision, as it determines how long your new dock will last and what kind of use you can get out of it. Wood, for example, is a classic option that looks great and works well in most settings. However, it carries the risk of mildew and mold growth as it is a natural material that is directly exposed to water. This is why many homeowners opt for composite or plastic decking, as these materials are much more resistant to moisture.

Another popular option for dock planking is stainless steel, as it is strong enough to withstand the impact of heavy boat traffic and day-to-day wear and tear. It’s also extremely durable and requires little maintenance as it is naturally protected against corrosion. It is also incredibly stable due to its density, which means that it doesn’t shift or move easily even in windy and wavy conditions. Steel is the preferred material for commercial docks and those built by the marine industry, as it’s very difficult to damage or destroy. When it comes to installing this material, blind bolts play a critical role.

One final note about dock construction: unlike building a shed or renovating your bathroom, working on structures over water bodies is highly regulated by local authorities and requires a permit. Obtaining this permit ensures that you’re following all of the rules and regulations in order to keep your dock safe, secure and up to code.

, our professional crews receive extensive training from our master craftsman trainers in both classroom and hands-on situations. Combined with our apprenticeship programs, this specialized training translates into unmatched productivity for our clients.

If a dock is not properly anchored, it can become unsteady and possibly fall off the water’s surface. It can also be dangerous for anyone who uses it and could potentially cause damage to boats and the shoreline. offers a variety of anchoring options to ensure your dock is secure in any body of water. The type of anchoring method needed will depend on the conditions where your dock is located. For example, if you’re building on the ocean, it will have to contend with larger waves and more drastic water fluctuations than a lake. Areas prone to hurricanes may also require additional hurricane holes and/or a system with multiple cable applications.

The four most common dock anchoring methods include sleeve anchoring, pile anchoring, pole and sleeve anchoring, and cable anchoring. Pile anchors are ideal for docks that must be strong and stable to handle heavy loads. They can be used on wood, concrete or steel pilings.

A sleeve anchor is best for windy areas that can experience high waves. These anchors have durable vertical galvanized steel sleeves attached to the dock, with long, galvanized poles running through them and into the lake bed. A winch or cable system is typically connected to the bottom of each pole to help move and adjust to changing weather conditions.

Stiff arm anchors are good for near-shore docks that must transport heavy loads or hold a lot of people. These systems use a winch or cable with reinforced arms to connect the dock and the shoreline.

For floating docks, a series of crisscrossed chain anchors are recommended. The chains are connected with a quick chain link to a rebar anchor that is set in the lake floor. These anchors can be made from a wide variety of materials, including concrete, steel, or fiberglass.

In addition to anchors, you will need galvanized chain and eye bolts to attach the chains to the anchors. These fasteners are designed to help withstand the pressure from waves, and can be secured with a chain swivel or a cleat.